 |
|
 |
|
|
|
|
|
|
|
 |
|
DICING BLADES FOR HARD AND
BRITTLE MATERIALS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ADT offers the
industry's most extensive catalog of dicing blades in an unlimited
combination of diameters, thicknesses and geometries. Grit size,
concentration, and bond hardness are optimized for a wide variety of hard
and brittle material applications. ADT is developing ways to quantify and regulate dicing blade materials and
characteristics, for the most favorable effect on cut quality, blade life
and throughput. By combining this information with process parameters that
have been 100% laboratory tested, solutions to these challenges are now
easily obtainable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NICKEL BLADES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
The Nickel binder provides longer blade life and lower wear rate and
together with the abrasive makes Nickel-bond Blades a perfect choice
for soft material applications such as: PCB, Silicon and BGA |
|
|
Blade thickness varies from 0.8 mil to 20 mil (depending on diamond
grit size) |
|
|
Diamond grit size ranges from 2-4 microns to 70 microns (depending
on blade thickness). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHNICAL NOTES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get
the
NICKEL BLADE product
catalogue
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESIN BLADES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
Resin as binder allows for blade wear management rendering
Resin-bond Blades an excellent choice for hard and brittle materials
such as: QFN/MLF, Thick Ceramic Substrates, HTCC and Glass
|
|
|
Resin Blade thickness varies from 3 mil to 100 mil (depending on
diamond grit size) |
|
|
Diamond
grit size ranges from 3 microns to 250 microns (depending on blade
thickness). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHNICAL NOTES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get
the
RESIN BLADE product
catalogue
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
METAL SINTERED BLADES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
With slower wear rate than Resin but faster than Nickel, Metal-bond
(Sintered) blades are best suited for retaining package shape and
size in applications such as: BGA, Soft Alumina, TiC, LTCC and
Ferrite |
|
|
Blade thickness varies from 3 mil to 60 mil (depending on diamond
grit size) |
|
|
Diamond grit size ranges from 2 microns to 70 microns (depending on
blade thickness). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHNICAL NOTES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get
the
METAL SINTERED product
catalogue
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRODUCT DATA
SHEETS |
|
|
|
|
PACKAGE SINGULATION BLADES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Package
Singulation - 447k
E-Series:
Resin Blades for QFN - 70k
|
|
|
|
|
Our
entire selection of blades (nickel, sintered, and resin) is offered in
serrated or non-serrated, as well as annular formats. All blades are also
offered in 2" to 5" diameters and in the full range of
thicknesses, diamond grit sizes, and concentrations. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E-SERIES
BLADES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our
revolutionary, new E Series resin blade formula exhibits wear resistance
that is significantly better than standard resin matrixes, making it an
excellent choice for the toughest QFN, hard alumina, ceramic (LTCC), and
quartz applications. |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DICING FLANGES & ACCESSORIES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
Strict monitoring at each critical stage of the production process
insures that each ADT product meets the desired specifications and
dimensional tolerances. |
|
|
Our
dicing blades & accessories are tested extensively on the latest
platforms, simulating the customer’s operating conditions and
process parameters. A 100% final inspection is conducted on all
products leaving the factory. |
|
|
Available for all blade types in the range of 2”- 5”, ADT’s
extensive line of flanges exhibits high- accuracy, excellent
performance, ease- of- use and affordability. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHNICAL NOTES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get
the
FLANGES
& ACC. product
catalogue
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
