HOME ] UP ] FEEDBACK ] CONTENTS ] SEARCH ]
Screen-Stencil Cleaners

[ Screen-Stencil Cleaners ] Batch Cleaning Systems ] Wave Solder Pallets ] Workboard Holders ] Process Carriers ] Custom Fixture ]
SITE LINKS

 

 

EMC GLOBAL TECHNOLOGIES

EMC home

EMC SCREEN CLEANING SYSTEMS 

Pneumatically or Electrically driven Environmental safe Systems

EMC 1000 SERIES SYSTEMS 

The CyberClean® 1000 SERIES is designed for chemistries that do not require a water rinse. These machines run exclusively on compressed air and are available in various sizes and types. Basic models are built in a compact footprint with cleaning chamber sizes of 16", 24", 32", and 40" square. Convertible models are available with the same cleaning chamber sizes that are slightly larger in footprint, allowing for customization of the equipment.
The innovative pneumatic spray system provides a pulsating high-volume, low-pressure spray that gently but thoroughly cleans even dried-on soils. Ergonomic front-loading design and front panel mounted controls provide easy operation. Internal access can be gained from three sides for ease of maintenance and service.
Plumbing and tanks are constructed of stainless steel with corrosion resistant exterior access panels. Machines can be configured to handle most solder paste and adhesive cleaning chemistries on the market today. Closed-loop systems are available.

EMC 2000 SERIES SYSTEMS 

The CyberClean® 2000 Series is designed for chemistries that do not require a water rinse. These machines are electrically operated and provide more application pressure than our pneumatic machines. As in the 1000 series, they come in four wash chamber sizes, 16", 24", 32" and 40" square. Basic PLC process control allows for flexibility in programming cycle times as well as many other peripheral functions. A dedicated filtration system that continually passes the cleaning chemistry through staged particulate filters and media beds is a standard feature on the convertible models. 
Naturally, environmental and operator safety have been addressed throughout the design. The cleaning chemistry is kept in a sealed reservoir during product loading and unloading, thus exposing much less solution to the outside environment. Cooling coils in the reservoir are used to keep evaporation to a minimum, and are a standard feature. Both open and closed loop exhaust systems are available.

EMC 3000 SERIES SYSTEMS 

The CyberClean® 3000 Series is designed for chemistries that require a water rinse. These machines are electrically operated and are built in a compact footprint with cleaning chamber sizes of 16", 24", 32", and 40" square. Convertible models are available with the same cleaning chamber sizes that are slightly larger in footprint, allowing for customization of the equipment. 
The 3000 series also provides the capability of heating the cleaning chemistry to the desired operating temperature prior to application. 
Naturally, environmental and operator safety have been addressed throughout the design. The cleaning chemistry is kept in a sealed reservoir during product loading and unloading, thus exposing much less solution to the outside environment. 
As in the 1000 and 2000 series, 3000 series machines are available in two models. Liquid level control and visible cycle indicator lights are a standard feature on all models. Automatic chemical metering, pump out and refill are available on upgraded models.

The cleaning unit: Model-32R.mpg (2.34 MB)
The spray demo:
Demo-spray.mpg (153 Kb)

HOME ] UP ]
Send mail to info@bita.se with questions or comments about this web site.
Copyright © 1998 BITA ELEKTRONIK SVENSKA AB 
Last modified: 2016-08-22