HOME ] UP ] FEEDBACK ] CONTENTS ] SEARCH ]
1732-3

INFO ] 1513 ] 1572 ] 1570 ] 1574 ] 1548 ] 1573 ] 1551 ] 1520 ] 1590 ] 1591 ] 1592 ] 1593 ] 1800-60 ] 1800-70 ] 1800-80-25 ] 1800-80-33 ] [ 1732-3 ] Optional ]
SITE LINKS

 

 

GAISER TOOL COMPANY

Gaiser Tool Company - Home Page

GAISER 1732 & 1733 SERIES "BALL BUMPING" BONDING

1/16 in. (1.58 mm) SHANK DIAMETER CERAMIC CAPILLARIES

THERMOSONIC CAPILLARIES   

The 1732 and 1733 series capillaries are designed for applications where a ball bond only is required. The user-friendly part number allows the hold and "B" dimensions to be specified in the part number for various wire diameters, bond pad sizes, and bond pad pitches. The "T" dimension is automatically  

minimized for fine pitch applications unless otherwise specified. The tool face is flat and polished. The 1732 and 1733 are ceramic material unless otherwise specified as tungsten carbide (Add "-WC" To Part No.); for tip modifications, see Tip Modifications

GTC 1732 and 1733 "Ball Bumping and Flying Lead"

AVAILABLE HOLE SIZES

 

CLEARANCE TABLE

in / +.0001 / 2.5 BALL BOND PITCH
in./
MAXIMUM RECOMMENDED
'B' DIMENSION
in./ +.0002 / 5
0.0010 / 25
0.0011 / 28
0.0012 / 30 0.00350 / 89 0.0022 / 56
0.0013 / 33 0.00375 / 95 0.0024 / 61
0.0015 / 38 0.00400 / 102 0.0026 / 66
0.0017 / 43 0.00425 / 108 0.0028 / 71
0.0018 / 46 0.00450 / 114 0.0030 / 76
0.0019 / 48 0.00475 / 121 0.0031 / 79
0.0020 / 51 0.00500 / 127 0.0033 / 84
0.0022 / 56 0.00525 / 133 0.0035 / 89
0.0025 / 64 0.00550 / 140 0.0037 / 94
0.0027 / 69 0.00575 / 143 0.0039 / 99
0.0030 / 76 0.00600 / 152 0.0041 / 104
0.0033 / 84 0.00650 / 165 0.0044 / 112
0.0035 / 89 0.00700 / 178 0.0048 / 122
0.0040 / 102 0.00750 / 190 0.0052 / 132
0.0045 / 114 0.00800 / 203 0.0056 / 142
0.0050 / 127 0.00850 / 216 0.0059 / 150
0.0055 / 140 0.00900 / 229 0.0063 / 160
0.0060 / 152 0.01000 / 254 0.0070 / 178

Dimensions in inches unless otherwise specified

1732 & 1733 SERIES

bullet If a radiused inside chamfer is desired in a 120 IC 1551, then use the 1520 series.
bullet HOLE LESS THAN 0.0011 AND 0.0025 THROUGH 0.0049, TOLERANCE IS +.0002; -.0001
bullet HOLE GREATER THAN 0.0049, TOLERANCE IS +.0003; -.0001
bullet B DIM GREATER THAN 0.0040, TOLERANCE IS .0003; -.0002
bullet Tighter tolerances available at additional charges


More information how to order

Get the BALL BUMP CAPILLARY Product Datasheet in BALL BUMP CAPILLARY format  

HOME ] UP ]
Send mail to info@bita.se with questions or comments about this web site.
Copyright 1998 BITA ELEKTRONIK SVENSKA AB 
Last modified: 2016-08-22