HOME ] UP ] FEEDBACK ] CONTENTS ] SEARCH ]
Wedge Bonders

Ball Bonders ] [ Wedge Bonders ] Peg Bonders ]
SITE LINKS

 

 

HYBOND INC.

HYBOND Home

THERMOSONIC/ULTRASONIC WEDGE BONDERS TO USE WITH GOLD WIRE & GOLD OR ALUMINUM RIBBON

HYBOND sets the industry standard for ease of operation and maintenance. Front panel operator controls include force, bond time, ultrasonic energy, tail length, EFO power, and stage heat. The 4:1 X-Y manipulator stage movement and Z axis bond motion are conveniently located to reduce operator fatigue. Precision machined mechanical components with sealed ball bearings at major points are durable and trouble free. Modular electronics facilitate quick and cost effective maintenance.

HYBOND MODEL 572-SERIES 

Imitated but never duplicated, HYBOND's exclusive Soft Touch force ramping system bonds effectively with less trauma to sensitive materials like GaAs and InP.

Superior wire control is provided by the motorized feed system which features clamps capable of feeding wire and ribbon, dial adjustable tail length, switch for manual tail length adjustment and clamp pull back dial adjustment to allow bonding and cutting of softer (higher elongation) wires than conventionally used for wedge bonding. Model 572A includes front panel independent controls for 1st and 2nd bond U/S, Time & Force as well as for the built in workstage temperature controller. The 572A has a proven track record of safe and effective wire and ribbon bonding worldwide.

MODEL 572A "DEEP-ACCESS" WEDGE BONDER

HYBOND Model 572A Ball Bonder
Model 572A

bullet

Hybond Soft Touch energy system

bullet

Independent Z lever control of bonding tool

bullet

Motorized vertical wire feed

bullet

1-1-2, 1-2-2 & 1-2-1 stitch capability

bullet 0.5 and 2 inch spool mounts
bullet Loop height control adjustment
bullet

Front panel wire feed control for manual tail adjustment

bullet

Swing-away wire clamp assembly

bullet

Deep vertical access of 0.59 in. (1.49 cm)

bullet

Horizontal reach of 3.5 in. (8.89 cm)

bullet

Deep access Wire-In-Tool 90 degree wire feed

bullet

Wire and ribbon bonding capability

bullet Independent control of 1st & 2nd bond parameters
bullet Tail length adjustable in .003" increments
bullet Audio & visual bond sequence fault indicators
bullet

6 x 8.5 inch work platform

bullet

LED display of work stage temperature

bullet

Infinite angle microscope mounting

bullet

Front panel ultrasonic test button

DATA SHEET   
 Get the Model 572A Datasheet in PDF format.
 
MODEL 572A-40 "DEEP-ACCESS" WEDGE BONDER

HYBOND Model 572A-40 "long-reach" Wedge or Ribbon Bonder
Model 572A-40 "long-reach"

bullet

Hybond Soft Touch energy system

bullet

Independent Z lever control of bonding tool

bullet

Motorized vertical wire feed

bullet

1-1-2, 1-2-2 & 1-2-1 stitch capability

bullet 0.5 and 2 inch spool mounts
bullet Loop height control adjustment
bullet

Front panel wire feed control for manual tail adjustment

bullet

Swing-away wire clamp assembly

bullet

Deep vertical access of 0.59 in. (1.49 cm)

bullet

Long horizontal reach of 6.5 in. (16.5 cm)

bullet

Deep access Wire-In-Tool 90 degree wire feed

bullet

Wire and ribbon bonding capability

bullet Independent control of 1st & 2nd bond parameters
bullet Tail length adjustable in .003" increments
bullet Audio & visual bond sequence fault indicators
bullet

10x12 in. (25.4x30.3 cm) X-Y work platform

bullet

LED display of work stage temperature

bullet

Infinite angle microscope mounting

bullet

Front panel ultrasonic test button

DATA SHEET   
 Get the Model 572A-40 Datasheet in PDF format.
 
HYBOND MODEL 626 MULTIPURPOSE DIGITAL THERMOSONIC BONDER 

Model 626 is a Deep Access, Long Reach Wire Bonder that can operate as a Ball, Wedge, Bump or Peg bonder. Model 626 can be used for wire diameters from 0.7 to 2.0 mil (18 to 51m) gold wire when in ball bonder configuration or 0.5 to 3.0 mil (12 to 76m) and ribbon up to 1.0 x 12.0 mil (25 x 300m) when in wedge or Peg bonding mode.

The 626 was specifically designed for applications that require bonding at extreme height differences between 1st and 2nd bond and for bonding wires to sensitive devices such as gallium arsenide FET's and LED's. Model 626's motorized wire feed and wire/ribbon clamping system provide superior wire/ribbon control and allow the operator to increase or decrease tail length in 1 mil (25m) increments at a touch of a switch. Model 626 shows actual units for set up of bond parameters.

Change over from Ball bonder to Wedge bonder requires only a press of a button to turn EFO power to zero and a change from capillary to wedge tool. Model 626 can also operate in Bump or Peg bonding modes. Add option "OP-47" for pick, place and bond feature.

FEATURES   

HYBOND Model 626 "Multipurpose" Wedge/Peg or Ribbon Bonder
Model 626 "Multipurpose" Wedge/Peg or Ribbon Bonder

bullet Hybond Soft Touch energy system
bullet

100 Bond schedules programmable in non-volatile memory

bullet

Selectable/adjustable reset heights (constant or adaptive)

bullet

1-2-2 auto stitch or manual continuous stitch in manual & auto modes when ball bonding

bullet

Sensor controlled bond actuation for variable bonding height

bullet

0.740 inch max. vertical bonding window

bullet

Deep vertical access of 0.53 in. (1.34 cm)

bullet

Static dissipative enclosure

bullet

Ball, Wedge, Bump or Peg bond capable

bullet

Horizontal reach of 6.5 in. (16.51 cm)

bullet

Programmable loop and search heights

bullet

Built-in digital temperature controller

bullet High/low power PLL ultrasonic generator
bullet Swing-away wire clamp assembly
bullet 0.5 and 2 inch spool mounts
bullet

Z-axis movement controlled by footswitches or manipulator

bullet

Motorized Z-axis control in auto and manual modes

bullet

Audio & visual bond indicators

bullet

Electronic ball size control 0-4x wire diameter

bullet

Ideal for R&D and production

DATA SHEET   
 Get the Model 626 Datasheet in PDF format.
 
HYBOND MODEL 676 PROGRAMMABLE THERMOSONIC WIRE & RIBBON WEDGE BONDER

Model 676 is a Deep Access, Long Reach Thermosonic Wedge Bonder for wire diameters from 0.5 to 3.0 mil (12 to 76m) and ribbon up to 1.0 x 12.0 mil (25 x 300m) featuring HYBOND's unique Soft Touch energy system. Model 676 was specifically designed for applications that require bonding at extreme height differences between 1st and 2nd bond and bonding wires to sensitive devices such as gallium arsenide FET's and LED's. Model 676's motorized wire feed and wire/ribbon clamping system provide superior wire/ribbon control and also allow the operator to increase or decrease tail length in 1 mil (25m) increments at a touch of a switch. The amount of clamp "pull-back" required to break the wire at final bond may also be varied in relation to wire elasticity allowing the use of softer wires (higher elongation) than conventionally used in wedge bonding. Model 676 shows actual units for set up of bond parameters.

FEATURES   

HYBOND Model 676 Digital Wedge/Ribbon Bonder
Model 676 Digital Wedge/Ribbon Bonder

bullet Hybond Soft Touch energy system
bullet

Bond schedules programmable in non-volatile memory

bullet

Selectable/adjustable reset heights (constant or adaptive)

bullet

1-1-2, 1-2-2 & 1-2-1 auto stitch or manual continuous stitch in manual & auto modes

bullet

Sensor controlled bond actuation for variable bonding height

bullet

0.740 inch max. vertical bonding window

bullet

Deep vertical access of 0.53 in. (1.34 cm)

bullet

Horizontal reach of 6.5 in. (16.51 cm)

bullet

Programmable loop and search heights

bullet

Built-in digital temperature controller

bullet High/low power PLL ultrasonic generator
bullet Swing-away wire clamp assembly
bullet 0.5 and 2 inch spool mounts
bullet

Z-axis movement controlled by footswitches or manipulator

bullet

Motorized Z-axis control in auto and manual modes

DATA SHEET   
 Get the Model 676 Datasheet in PDF format.
 

HOME ] UP ]
Send mail to info@bita.se with questions or comments about this web site.
Copyright 1998 BITA ELEKTRONIK SVENSKA AB 
Last modified: 2016-08-22