HOME ] UP ] FEEDBACK ] CONTENTS ] SEARCH ]
RSS-110-160-310 REFLOW

2 ZONE VACUUM SEALER ] RTP-100 SERIES OVENS ] RTP-150 SERIES OVENS ] VPO-1000-300 VACUUM PROC. ] RSO-200 REFLOW ] RSS-3X210 SYSTEM ] [ RSS-110-160-310 REFLOW ] VSS-450-300 VACUUM REFL. ] HOT CHUCK/ WORKSTAGES ] HOT PLATES/ WORKSTAGES ] ACCESSORIES ]
SITE LINKS

 

 

UNITEMP GMBH.

RSS-110, RSS-160 AND RSS 310 SOLDER SYSTEM 

The RSS-110, RSS-160 and RSS-310 Reflow Solder Systems are excellent tools for various solder processes up to 110/160/310 mm diameter wafer or 110/160/310 mm x 110/160/310 mm substrate size and 40 mm height. Some examples for applications: Laboratory furnace for all kind of developers implementing and researching new processes, prototype research, environmental research purposes and for small pre-series or series.

PROCESS GASES 

Beside standard process gases, like Nitrogen, Oxygen, Forming Gas the system can also be used with pure Hydrogen (Option: H2 and H2S) and contaminating gases. The chamber is sealed and can easily be cleaned. Even flux can be used. The Option RSS-FA allows the use of formic acid for void free solder results.

FLOW METER 

One gas line with Flow Meter (FM) (manually operated) is default, one more gas line (Option: FM) is possible. Also a Flow Meter with digital display (FM-EL) or a Mass Flow Controller (MFC) can be choosen.

VACUUM 

The RSS-110, RSS-160 and RSS-310 are vacuum sealed up to 10 hPA. A membrane pump, a chemically resistant membrane pump (recommend when the Option RSS-FA is used) and a rotary vane pump are available as accessories.

TEMPERATURE AND TEMPERATURE DISTRIBUTION 

The standard temperature is 350 C (Option: HT up to 450 C). Key features are precisely controlled fast ramp-up (120 K/min) and ramp-down rates (up to 120 K/min). The hot plate allows an excellent temperature distribution and homogeneity.

PROGRAMMING 

The RSS-HC controller is equipped with an Eurotherm PID Controller. The programming can either be done directly at the controller or on an external PC by using the USB interface. The UniSoft Software is scope of delivery and is a Windows based version which can be installed on each standard PC or Laptop. The standard controller allows the programming of 1 program with 16 steps and which can be saved directly at the controller. As option the RSS- HC can be equipped with a 2609 Eurotherm controller (with 20 programs and 100 steps). An additional feature is the choice between precisely programming ramp-rate or ramp-to-target values.

COOLING 

The hot plate is actively cooled. For chamber housing cooling an external cooling is required. We recommend a closed loop water cooling system (Accessory, WC-I).

GENERAL 

The chamber is hermetically sealed with a viewing-window which allows observation of the process during soldering. Two program controlled gas lines with flow meters allow use of two different gases, either Nitrogen or forming gas. By connecting to an external pump the furnace is made vacuum capable. An economical & compact unit as table top version perfect for:

bullet flux-less soldering
bullet flip chip process
bullet adhesive bonding
bullet hermetical sealing under controlled atmosphere
bullet solder bump reflowing
bullet encapsulation of housings
bullet soldering of power devices
bullet heat treatment of semiconductor wafers
bullet prototype research
bullet quality control and environmental research
TECHNICAL DATA RSS-110  

UniTemp RSS-110 Reflow Soldering System

UniTemp RSS-110 Reflow Soldering System with Heat Controller (RSS-HC with one flow meter and 2609 controller)

bullet

heated area: 110 mm x 110 mm x 40 mm

bullet

viewing window

bullet vacuum atmosphere up to 10exp.-3 hPa
bullet temperature up to 450 C
bullet

ramp up rate:      better 120 K/minute

bullet

ramp down rate: better 100 K/minute

bullet

external controller

bullet

USB interface

bullet

up to 2 gas lines (a 3rd gas line with option RSS-FA)

bullet

water cooling required

bullet

electrical connection type: 230V, 1 Phase, PE, 1600 W (EU) (* changes when 100V/1200W or 120V/1200W is required)

DATA SHEET  
Get the RSS-110/160 Datasheet in UniTemp RSS-110 Reflow Soldering System.
INFORMATION   COMPARISON SHEETS  
  Get the RSS Comparison Sheet Comparison RSS Reflow Solder Systems
Get the Customer Specific Ovens UniTemp Customer Special Ovens
TECHNICAL DATA RSS-160  

UniTemp RSS-160 Reflow Soldering System

UniTemp RSS-160 Reflow Soldering System with Heat Controller (RSS-HC with two flow meters and 2609 controller)

bullet

heated area: 160 mm x 160 mm x 40mm

bullet

viewing window

bullet vacuum atmosphere up to 10exp.-3 hPa
bullet temperature up to 450 C
bullet

ramp up rate:      better 100 K/minute

bullet

ramp down rate: better 100 K/minute

bullet

external controller

bullet

USB interface

bullet

up to 2 gas lines (a 3rd gas line with option RSS-FA)

bullet

water cooling required

bullet

Electrical connection: 1x230V, 1 Phase, N, PE, 2,4 kW * changes if 200V/1800W or 120V/1200W are required

DATA SHEET  
Get the RSS-110/160 Datasheet in UniTemp RSS-160 Reflow Soldering System.
INFORMATION   COMPARISON SHEETS  
  Get the RSS Comparison Sheet Comparison RSS Reflow Solder Systems
Get the Customer Specific Ovens UniTemp Customer Special Ovens
TECHNICAL DATA RSS-310  

UniTemp RSS-310 Reflow Soldering System

UniTemp RSS-310 Reflow Soldering System

bullet

heated area: 310 mm x 310 mm x 40 mm

bullet

viewing window

bullet

vacuum atmosphere up to 10exp.-3 hPa

bullet

temperature up to 350 C (optional up to 450 C)

bullet

heated by IR lamps (18 kW)

bullet

ramp up rate: up to 150 K/min

bullet

ramp down rate: up to 90 K/min (active cooling)

bullet

integrated controller (100 segments are programmable)

bullet

USB interface incl. software UniSoft

bullet

1 gas line with manual adjustable flow meter and digital display is default

bullet

up to 4 gas lines

bullet

water cooling required

bullet

Dimensions: 485 x 450 x 280 mm

bullet

Weight: about 45 kg

bullet

electrical connection: 3x32 A CEE plug, 230 V, 3 Phase, N, PE, 18 kW

DATA SHEET  
Get the RSS-310 Datasheet in UniTemp RSS-310 Reflow Soldering System .
INFORMATION   COMPARISON SHEETS  
  Get the RSS Comparison Sheet Comparison RSS Reflow Solder Systems
Get the Customer Specific Ovens UniTemp Customer Special Ovens
OPTIONS AND ACCESSORIES 

bullet

RSS-FM-EL Additional gas line with flow meter and digital display (max. 2 pcs)

bullet

RSS-FM-EL (up) upgrade instead of -FM to FM-EL (only for new systems)

bullet

RSS-EH Chamber height 80mm instead of 40mm

bullet

RSS-FA Formic Acid Module (incl. -FM)

bullet

RSS-H2 Hydrogen Module: for using 100% Hydrogen incl. FM-EL

bullet

RSS-H2S Safety device to prevent uncontrolled emission of Hydrogen

bullet

RSS-HT Temperature extension up to 450 C

bullet

RSS-IL Interlock mechanism during operation

bullet

RSS-TC Additional thermocouple (max. 2 pcs)

bullet

RSS-VM Vacuum measurement with vacuum sensor and data logging, up to 10exp.-3 hPa

bullet

RSS-2609 upgrade to a controller with 100 steps and 20 programs instead of 16 steps and 1 program

bullet

WC I+ WC II Closed loop water cooling system

bullet

MP Membrane pump for vacuum up to 10 hPa with manometer

bullet

MPC Chemical resistant membrane pump for vacuum up to 10 hPa with manometer

bullet

RVP Rotary vane pump for vacuum up to 10exp.-3 hPa with oil filter and vacuum measurement

HOME ] UP ]
Send mail to info@bita.se with questions or comments about this web site.
Copyright 1998 BITA ELEKTRONIK SVENSKA AB 
Last modified: 2016-08-22